Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Cranksets

Sunlite Crank Dust Cap
$2.63
- Crank dust cap - Works with most three-piece crank models
Wheels Manufacturing Inc. Freewheel/BB Spacer
$2.83 - $18.24
Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10
Sunlite Cottered Pin
$3.99
- Sunlite Cottered Pins
Race Face Chainring Bolt Pack
$4.16
Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.
Race Face Cinch Nylon Preloader Crank Assembly
$4.33
Replacement CINCH Preload Ring for non-driveside Race Face CINCH cranks
Wheels Manufacturing Inc. BSA Bottom Bracket Spacer
$5.99
Wheels Manufacturing 2.5mm Black Aluminum Bottom Bracket Spacers are for adjusting chainline or bearing play in English (BSA) or Italian threaded bottom brackets.
Origin8 Thruster 1x Chainring Bolt Set
$7.99 - $10.99
- Chainring bolt sets are available in sets of four or five - Bolts have 5mm hex heads - Inner Length: M8x7.5mm Bolt (x4) / M8x7mm Nut (x4) - Material: Steel - Type: 1x
Origin8 3.5mm Chainring Spacers
$8.62
Spacers to insure proper chainline and chainring spacing on your bike. - 3.5mm thick - Material: alloy
Race Face Chainring Bolt Pack Set of 4 12.5mm Bolt/Nut
$8.75
Race Face steel chainring bolts. Includes four sets of 12mm bolts/nuts for inner and outer chainrings.
Sunlite Steel Cottered Crankarm
$8.98
• Forged steel • 6 1/2-inch • Compatible with 9/16" pedals • Left crank • Drilled for 9.5mm cotter pins
Origin8 Double/Triple Chainring Bolts
$8.99 - $20.99
Secure your chainrings for your ride with Origin-8's Double/Triple Chainring Bolts. Made for double and triple chainrings, each set includes 5 male/female bolts to securely connect your chain rings to the crank. Available in black and silver, as well as aluminum or steel.
Race Face CINCH Puller Cap with Washer 18mm XC/AM
$8.99
Race Face CINCH Crank Puller • Puller cap for Cinch model Race Face cranks only, including Next SL, SixC and Turbine • Puller cap utilizes 16mm hex key • 26mm thread
Problem Solvers Hex Crank Arm Fixing Bolt/Cap
$9.16
Problem Solvers Crank Arm Fixing Bolts - 8mm - Sold as a pair
Race Face Cinch Drive Side Crank Bolt
$9.73
Replacement crank bolt for RaceFace Cinch cranks.
Race Face M12 bolt for Respond, Chester and Ride DH
$9.99
Race Face 12mm crank bolt/puller for Respond, Chester, and Ride DH cranksets.
Race Face M15 bolt for 2008+ Evolve and Ride
$9.99
Race Face 15mm crank bolt/puller for 2008 and newer Evolve and Ride cranksets.
Race Face X-Type Spindle Spacer Kit FR/DH Cranks
$9.99
Replacement spindle spacers for Race Face X-Type FR/DH cranksets.
Race Face X-Type Spindle Spacer Kit XC/AM Cranks
$9.99
Replacement spindle spacers for Race Face X-Type XC/AM cranksets.
Sunlite One-Piece Crankarm
$9.99 - $19.99
• Forged steel • 24 TPI
Giant Specific Taper Replacement Left Crank Arm
$10.99 - $21.99
This replacement left crank arm is made of forged aluminum.
Origin8 Single Chainring Bolts
$10.99 - $27.47
Revamp the look of your single speed cranks with some new hardware. Origin-8's Single Chainring Bolts give a high polished look to any crankset. The anodized finish comes in multiple colors to highlight your crank and makes it look as good as you do. You can also choose between steel or aluminum bolts. • Set of 5 male/female bolts • Inside measures 4mm when tightened, 7mm total height
Origin8 Thruster 2x Chainring Bolt Set
$10.99 - $12.99
- Chainring bolt sets are available in sets of four or five - Bolts have 5mm hex heads - Material: Steel - Type: 2x
Origin8 Inner Chainring Bolt Set
$11.23
Secure your chainrings for your ride with Origin-8's Double/Triple Chainring Bolts. Made for inner triple chainrings, each set includes 5 male bolts to securly connect your chainrings to your crank.
Wheels Manufacturing Inc. Crank Spindle Spacer
$11.91 - $18.75
Use these Wheels Manufacturing Crank Spindle Spacers to adjust chainline or bearing play in bottom brackets. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Machined engineering-grade Delrin - 10 spacers per bag
Race Face Alloy Crank Boot
$11.99
Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips. Compatible with: - Race Face - Turbine Cinch - Atlas Cinch - Atlas (24mm Spindle) - Turbine (24mm Spindle) - Aeffect Cinch (175mm length ONLY) - Most other popular alloy MTB cranks (except some alloy DH cranksets)
Race Face Carbon Crank Boots
$12.48 - $12.60
Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips! Compatible with: - Race Face - Next SL Cinch (G3) - Sixc Cinch - Chester - Respond - Next/Next SL (24mm Spindle) - Sixc (24mm Spindle) - Most other popular carbon MTB cranks and assorted alloy DH cranks
Race Face Next SL G4 Crank Boots
$12.48
Trail riding can be tough on your gear. The ends of your Next SL G4 cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!
Wheels Manufacturing Inc. BB30 Outboard Spacer Kit
$12.48
This Wheels Manufacturing Spacer kit for BB30 Outboard bottom brackets includes 42mm ID spacers that fit between the BB30-OUT cup and the frame's bottom bracket shell. Use spacers for adjusting chainline. - 42mm ID - Black anodized aluminum Includes - (1) x 2.5mm - (2) x 1.0mm
Sunlite Steel Cotterless Crankarm
$12.73
• Forged steel • 6 1/2-inch • Compatible with 9/16" pedals • Left crank • Cotterless
Origin8 Thruster Crank Arm Tip Protectors
$12.99
Crank arm tip protectors for Origin8 Thruster Crank Arm Tip Protectors fit all Thruster Series MTB, Boost, and Fat cranksets. Grab a pair to protect your crank arm tips from abrasions and impacts.
Page 1 of 10 Next page