$1.69 - $6.99
Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools. • Made from hardened alloy tool steel • Uses 7mm or 9/32" 12 pt box end/socket • Sold singly or in pairs
- Heat treated - Individual hex keys
This is a single replacement pin for Park Tool HCW-4 and SPA-6 pin spanner wrenches.
Put these beauties in your tool kit for quickly fixing flats on the road. - Light weight, low profile lever - Durable composite construction - Easy to get under the tire bead - Set of three levers to assist with hard-to-remove tires - Included cap keeps the set together
- Adjusts rear wheel for centering in frame - Size: 3/8" - Color: Silver
Hardened CRV steel bits. 3mm, 4mm & 5mm HEX sizes, T20 & T25 TORX 1/4" bit sizes. Also perfect for most brands of torque wrenches with the optional adapter below.
For dust cap removal on Origin8 XLT integrated cranks
Getting a flat is a pain in the butt. It's an even bigger pain in the butt if you don't have the stuff you need to get back home. These patches will help get you back to where you need to be. - Six patches - Sandpaper - Instructions included
Inserts and removes Presta valve cores
Fits all 1/4-inch socket-type torque wrenches for use with the Prestacycle Bicycle Bit Set. Prestacycle's bits cost 1/10 the price of buying socket head sets to meet all the requirements of bicycles. Using bits allows you to perform initial installation with Prestacycle's reversible mini ratchet – then leave the bit inside the job – remove the mini ratchet – and connect your torque wrench onto the bit to finish final tightening.
• 5/6mm hex wrenches
Brake pad spreader tool for Avid Elixir brakes.
Zipp Speed Weaponry Valve Extender Wrench Set - Two 4 mm and 5 mm combination wrenches - Replacement wrenches required to properly install Zipp integrated valve extenders - Use with Zipp Tangente tubes with aluminum Presta valve and aluminum valve extender
$4.99 - $25.99
Help your bearings run smoother and longer with Finish Line's Ceramic Grease. Its special blend of ceramic particles, Teflon and synthetic oils helps lube your bearings and dissipate heat, guaranteeing longer life and better function. Plus, it works great on stems, posts, cables and other threaded assemblies, too. - Optimizes performance and efficiency of bottom brackets, hubs and headset bearings - Use on stems, seat posts, cables and any threaded assemblies - Prevents rusting even when exposed to salt water - Clear and non-staining
$4.99 - $34.95
Finish Line's Fiber Grip Assembly Gel is specially designed to create friction and reduce slippage between clamped carbon fiber surfaces. It eliminates the need to over tighten clamps to achieve secure connections. Plus, it's been tested and approved by leading carbon fiber component manufacturers.
Whether you're fine-tuning your new full-suspension rig or tuning a fork you've ridden for years, Finish Line's Max Suspension Spray is a pro-grade stiction-fighting stanchion lubricant that maximizes the performance of your suspension. It smooths suspensions that have become dry or dirty and restores full travel and eliminates noise, too. Use Max before rides to ensure maximum responsiveness over the smallest of bumps, and the longest possible travel over extreme terrain. And, use Max to break in new forks or bring old ones back to life. It also conditions and protects rubber seals and O-rings and improves the surface slip of coated stanchions. - Helps suspension forks run more smoothly and quietly - Made with polysiloxane and advanced fluoropolymers
Park Tool's Replacement Chain Tool Pin fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools (each sold separately). • Made from hardened alloy tool steel • Uses 7mm or 9/32" 12 pt box end/socket
Don't leave home without Serfas' Tire Levers. This set of three high-density nylon levers comes with built-in spoke hooks for ease of tire removal. At only 30 grams, you'll only notice they're there when you need them!
To make tire removal and flat repair as easy as possible, Planet Bike's strong, ergonomic Lunar Levers have wide tips and ends that hook onto the spokes. Plus, they snap together for easy carrying, and form a container in which you'll find 3 adhesive patches and sandpaper to patch punctured tubes.
- Heat treated - Individual hex key
Park Tool's Replacement Chain Tool Pin fits Park Tool's CT-6, CT-6.2, and CT-6.3 Chain Tools (each sold separately). • Made from hardened alloy tool steel • NOTE: The 985-1 will also push out the chain rivet completely from the chain side plate.
Finish Line's Chill Zone works like magic to loosen and free rusted parts! Before discarding your rusted chain or giving up on a frozen crank bolt, a sticky derailleur, or a seized seatpost, give Chill Zone a shot. Bike parts that normally need to be replaced can be reconditioned to ride another day. Chill Zone has a special refrigerant that freezes metal as low as -50°F/-45°C contracting it and breaking the rust bond. Then Chill Zone's penetrant breaks down and flushes out the rust. With Chill Zone, most rusted parts quickly regain full functionality. Plus, it lubricates, too, so you don't need to add any. - Great for frozen crank bolts, seized seat posts and rusty chains and derailleurs - Includes oils and rust inhibitors to provide lubrication and protection after use - Use: Spray the rusted part for 10 to 20 seconds and wait 2-3 minutes for the release agent to fully wick in and break the rust. For severe rust-welded parts, spray 30-60 seconds for maximum freezing effect and wait ten minutes to one hour for thorough break-down of rust. When rehabbing a bicycle chain, soak one small section at a time.
Finish Line Citrus Degreaser. Super strong and fast. Cuts through the toughest of carbonized grit, grease, and grime. Low surface tension for thorough penetration into all areas. 100% active, biodegradable and nontoxic.
$5.99 - $32.99
Finish Line's Dry Lubricant with Teflon keeps your bike running silky-smooth rain or shine. It's very thin yet extremely durable thanks to its synthetic oils and Teflon particles. Great for your chain, cables, cleats and springs, its dry surface texture minimizes the accumulation of dirt and grit. Plus, it's biodegradable. - Great for dry, dirty and dusty environments. Attracts less grime and runs clean - Holds up well in moderately wet conditions - Can be used on derailleurs, shifters, cables and brake pivot points - Finish Line's most popular and versatile lubricant
Finish Line's E-Shift Groupset Cleaner is specially formulated to keep your sensitive and expensive electronic drivetrain clean and safe. It quickly and safely removes grit, grime and moisture from electric shifting drivetrain components, including the front and rear derailleur, derailleur pulleys, chain, cassette and even the crankset. E-Shift is safe and will not harm the wires or electronics. Plus, it dries in minutes leaving the drivetrain parts clean, and with no rinsing required.
$5.99 - $74.99
- A biodegradable degreaser that cuts through the toughest grime - Strong enough for the metal parts, Yet safe enough to clean parts with rubber o-Rings and seals, Urethane elastomers, And painted surfaces - Exceeds all federal v.O.C. And california carb regulations - Law prohibits orm-D materials from shipping by air
Whether you're fine-tuning your new full-suspension rig or tuning a fork you've ridden for years, Finish Line's Max Suspension Spray is a pro-grade stiction-fighting stanchion lubricant that maximizes the performance of your suspension. It smooths suspensions that have become dry or dirty and restores full travel and eliminates noise, too. Use Max before rides to ensure maximum responsiveness over the smallest of bumps, and the longest possible travel over extreme terrain. And, use Max to break in new forks or bring old ones back to life. It also conditions and protects rubber seals and O-rings and improves the surface slip of coated stanchions.
Clipless pedals require regular maintenance for optimum performance and longevity. Finish Line's Pedal and Cleat Lubricant sprays on to fully and evenly coat all frictional surfaces and is engineered to ensure you click in and out of your pedals quickly, easily and smoothly every time. It also helps prevent creaks and squeaks from the pedal/cleat interface. Plus, thanks to a 100% dry-to-the-touch (in seconds) micro-thin coating, there is no oily, greasy film. So, it's safe to walk around on floors in your cycling shoes. Finish Line's Cleat and Pedal Lubricant was designed in conjunction with the pedal experts at Speedplay.
Finish Line's Super Bike Wash quickly cleans dirt, mud, clay, road grime and chain gunk off your bike. Its five different cleaning agents work together to create a high-speed cleaning system. There are also three different rust and oxidation inhibitors to protect metal surfaces from rusting and corrosion. It's also safe for all bike surfaces.
Page 1 of 35 Next page