Holds stainless steel stay rods to fender Contains: - (1) Eyelet bolt - (1) 10mm lock nut - (1) Rubber cap Compatibility: - All Hardcore, SpeedEZ, Cascadia, Cascadia ALX, & Grasshopper fenders
Compatible with SpeedEZ fenders: - 26-inch x 60mm - 700c x 35mm - 700c x 45mm
- 8 rubber fender stay caps - Compatible with all Hardcore, SpeedEZ, Cascadia, Cascadia ALX, and Grasshopper fenders
Compatible with: - Hardcore bike fenders - 700c x 45mm - Full bike fenders - 700c x 45mm - SpeedEZ bike fenders - 700c x 45mm - Hardcore Recumbent bike fender - 700c rear - Contains 45mm rear fender plastic clip, fork and brake bridge thru bolts, stay bolts and lock washers
Compatible with: - Full bike fenders - 26" x 60mm - SpeedEz bike fenders - 26" x 60mm - Hardcore bike fenders - 26" x 60mm - Contains 60mm rear fender plastic clip, fork and brake bridge thru bolts, stay bolts and lock washers
The Hardcore Fender Hardware Kits are compatible with select Hardcore fenders, Full Fenders, Hardcore Recumbent Fenders, and SpeedEZ fenders. Includes: - Rear fender plastic clip - Fork and brake bridge-thru bolts - Stay bolts and lock washers Specific compatibility w/Planet Bike fenders: - 35mm Width: 700c x 35mm Fenders (Hardcore) - 45mm Width: 700c x 45mm (Hardcore, Full, and SpeedEZ); 700c Rear (Hardcore Recumbent) - 60mm Width: 26-inch x 60mm (Full, SpeedEZ, and Hardcore)
- Contains 2 Mudflaps and Quick-Snap attachments - Compatible with: ATB Hardcore and SpeedEZ fenders (sold separately) - For use with 60mm width fenders (sold separately)
- Contains 2 Mudflaps and Quick-Snap Attachments - Compatible with all hybrid (45mm) fenders (part#s 7004, 7006, 7013, 7015) (sold separately) - For use with 45mm width fenders (sold separately)
Topeak's MTX DeFender is the perfect addition to your RX BeamRack. It clips seamlessly to the rack and provides valuable protection against moisture and trail grime.
- Releases front fender stays if debris is present in between fender and tire - Fits current and past Grasshopper, Cascadia ALX, Cascadia and Hardcore front fenders (not recommended for non-Planet Bike fenders)
•Steel •Chrome Plated •Front or Rear •Cruiser •26-inch x 75mm
- Rubber straps - Fit Raceblade, Mud-x - Set of 8
Sunlite's Clip-On Fender Set fits 26-inch mountain bikes, so whether you ride sloppy trails or commute in any weather, you're covered. They're made from corrosion-proof plastic so they're light and tough, too.
The Cascadia Fender Hardware Kits are compatible with Cascadia fenders, Hardcore fenders, and Full fenders. Includes: - Rear fender plastic clip - Fork and brake bridge-thru bolts - Stay bolts and lock washers - Disc adaptor spacers (60mm & 65mm widths only) Specific compatibility w/Planet Bike Fenders: - 35mm Width: 700c x 35mm Fenders (Cascadia & Hardcore) - 45mm Width: 700c x 45mm Fenders (Cascadia, Hardcore, and Full) - 60mm Width: 26-inch x 60mm Fenders (Cascadia & Hardcore) - 65mm Width: 29-inch x 65mm (Cascadia)
Stay clean and dry with SKS's Hightrek fenders! The hardware is pre-installed for easy mounting. And, they fit a wide variety of fork, frame, and brake styles.
Keep water and mud off you with SKS's Mud-X down tube fender! This versatile fender works with most bikes regardless of wheel size.
X-Long Mudflap/Spoiler can be retrofitted to any fender profile of the correct size. A hole may need to be drilled in the profile if one isn't already there. - Adds 6 inches of coverage to any fender profile - 35mm size fits fender profiles up to 35mm - 53mm size fits fender profiles 46mm-55mm
The X-Long Spoiler is designed to add extra coverage to SKS fenders. - Compatible with 45mm versions of the Chromoplastic, Commuter II, Long Board and Raceblade fender models - Easily mounted by consumer with included hardware - Sold as Each
Features - Compatible with common wheel and tire sizes - Helps keep the back side of suspension fork bridges clean - Multi-color Giant logo sticker pack included
$10.89 - $15.08
- Attaches to saddle rails - Quick and easy to install and remove - Fat Butt, a wider version for fatbike applications - Road/CX narrower for road and cross bike applications
The S-Guard is not just for road bike cyclists; this super-lightweight (24g) and small mudguard protects your bottom from mud and water. Made with super-soft material, it fits on nearly every saddle with the addition of a cable tie.
- Guards against mud - Made from 100% recycled plastic waste - 100% recyclable - Supplied with 4 zip ties - Made in England
- Suitable for tire widths between 23mm and 35mm - Keeps you clean and dry on wet roads and trails - Newly improved designs in multiple options for better coverage - Attaches quickly without tools - Stores easily in a backpack or jersey pocket - Application: Rear - Fender Size: 380mm x 100mm - Wheel Size: Universal - Material: Polypropylene - Weight: 18g
The Mudrocker Rear Extender can be snapped on and used for extra protection in the bottom bracket/derailleur area. This item is included with the Mudrocker Rear Fender, but we offer it here as a replacement. - Made in Germany
- Keeps you clean and dry on wet roads and trails - Attaches quickly to saddle rails without tools - Stores easily in a backpack - Fender Size: 237mm x 154mm - Material: Polypropylene - Weight: 18g - Wheel Size: Universal
Planet Bike's Grunge Board is an easy-to-mount front fender that keeps you dry and clean when it's wet and muddy. It's made from a nearly indestructible polymer and it mounts in seconds to your down tube with the 2 rubber straps.
Shockboard / Shockblade & Dashboard hardware kit (for 2nd bike)
Easy to install and available in various colors and designs, the MSW Splash Pad Rear Fender won't let wet weather spoil your ride. It's designed for use with a range of bicycle styles and is compatible with standard saddle rail configurations. - A low-profile, easy-install fender that keeps riders clean in various conditions - Fits wide range of wheel sizes - Tool-free installation - Zip ties not included. Color zip tie options available through Problem Solvers.
Lightweight and stealthy, Muc-Off Ride Guards keeps mud fling to a minimum. - Guards against mud - Made from 100% recycled plastic waste - 100% recyclable - Supplied with 4 zip ties - Made in England
- Lightest and most versatile MTB mudguard available - Uses hook and loop Velcro straps to attach to the bridge and lower legs - Compatible with forward and double bridge fork designs and all wheel sizes
Page 1 of 6 Next page